Spray dryer was used to produce particles from a milk-blackberry pulp mixture (25%:75% (w/w)). Maltodextrin 10DE and 20DE and gum Arabic were used as adjuvants in order to improve powder quality. The particles were analyzed with emphasis on physical and physicochemical characteristics: moisture content, bulk density, particle size, morphology, water activity, anthocyanins retention, anthocyanins content, hygroscopicity, solubility, water sorption, and glass transition temperature. The best results were obtained for the paste composition of 25% concentrated milk-70% blackberry pulp-5% gum Arabic, yielding high anthocyanins retention (>87.5%), low powder moisture content of 0.0265 g H2 O/g dry matter and a higher powder solubility (>71.8%) when compared with other formulations. The increase of water content led to a decrease of powder's glass transition temperature. Powder stability was evaluated and the critical values of relative humidity and moisture content were estimated based on state diagrams of glass transition combined with sorption isotherm data.