Resumen El proceso de lavado de garrafones de 20 litros basado en un sistemas con diseños de control, permite mejorar el consumo del desinfectante determinando una cantidad estimada para cada garrafón en un tiempo promedio, esto se da mediante la ejecución realizada en una estructura diseñada para dos botellones, en donde descansan sobre dos soportes previamente construidos por sistema de impresión 3D que es lo ideal para este proceso ya que no existen en el mercado, la ubicación del garrafón será 90° en dirección hacia abajo sujeto por fricción que evita que salga expulsado por la fuerza del flujo, el proceso es manipulado mediante botones físicos de acción o botones digitales diseñados en una interfaz gráfica (HMI), obtener el flujo necesario para el proceso de lavado requiere de una identificación, es decir el modelo analítico, que será realizado en la etapa del bombeo del desinfectante, consiguiendo como resultado una ecuación denominada función de transferencia, esto implica una lectura de datos que obtendremos con un sensor de flujo, la misma que nos permitirá extraer una base de datos para el proceso de identificación obtenida mediante programación en el software TIA Portal, este registro de información del flujo será procesado en la plataforma de Matlab que es la que permitirá determinar dicha función, al obtener esta ecuación podemos diseñar el controlador en la misma planta con la cual se podrá programar el controlador en TIA Portal con los valores obtenidos.
Abstract He 20 liter bottle washing process based on a system with control designs, allows to improve the consumption of the disinfectant by determining an estimated amount for each bottle in an average time, this is given by executing it in a structure designed for two bottles , where they rest on two supports previously built by 3D printing system that is ideal for this process since they do not exist in the market, the location of the container will be 90 ° in the downward direction subject to friction that prevents it from being ejected by the force of the flow, the process is manipulated by physical action buttons or digital buttons designed in a graphical interface (HMI), obtaining the necessary flow for the washing process requires an identification, that is, the analytical model, which will be performed in the stage of pumping the disinfectant, resulting in an equation called transfer function, this i It explains a reading of data that we will obtain with a flow sensor, which will allow us to extract a database for theidentification process obtained through programming in the TIA Portal software, this Flow information record will be processed on the Matlab platform which is what will allow todetermine this function, when obtaining this equation we can design the controller in the same plant with which the controller can be programmed in TIA Portal with the obtained values.