2
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Parametric Analysis of a Gasification-Based Cookstove as a Function of Biomass Density, Gasification Behavior, Airflow Ratio, and Design

      research-article
      , , , ,
      ACS Omega
      American Chemical Society

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The energy performance and emissions (carbon monoxide and total suspended particulate matter) of a biomass gasification-based cookstove under a modified water boiling test (WBT 4.2.3 protocol) were characterized here. The controllable process parameters analyzed were the biomass bulk density (pellets—WP and chips—WCH) and the combustion-air/gasification-air ratio (2.8, 3.0, and 3.2). Moreover, a design parameter of the cookstove was analyzed through two combustion chamber designs (combustion chambers 1 and 2). The cookstove was characterized in detail considering the complete cookstove (control volume 1), the combustion chamber (control volume 2), and the gasification process (control volume 3). The cookstove reached an average efficiency of 25.2% for pellets and 24.1% for chips. The best behavior for the cookstove was achieved when pellets were used, which is attributed to their higher bulk density and to the fact that during their gasification process, the biochar yield was 12% higher, while the biomass consumption decreased by 16% compared to the chips. The carbon monoxide specific emissions were 2.78 g/MJ d for pellets and 2.75 g/MJ d for chips. On average, the cookstove released total suspended particulate matter between 74.11 and 122.70 mg/MJ d. The cookstove low emissions are ascribed to the proper combustion air flow and the combustion chamber design, which favored the mixing between producer gas and combustion air.

          Related collections

          Most cited references76

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990–2017: a systematic analysis for the Global Burden of Disease Study 2017

          Summary Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk–outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk–outcome pairs, and new data on risk exposure levels and risk–outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk–outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017. Findings In 2017, 34·1 million (95% uncertainty interval [UI] 33·3–35·0) deaths and 1·21 billion (1·14–1·28) DALYs were attributable to GBD risk factors. Globally, 61·0% (59·6–62·4) of deaths and 48·3% (46·3–50·2) of DALYs were attributed to the GBD 2017 risk factors. When ranked by risk-attributable DALYs, high systolic blood pressure (SBP) was the leading risk factor, accounting for 10·4 million (9·39–11·5) deaths and 218 million (198–237) DALYs, followed by smoking (7·10 million [6·83–7·37] deaths and 182 million [173–193] DALYs), high fasting plasma glucose (6·53 million [5·23–8·23] deaths and 171 million [144–201] DALYs), high body-mass index (BMI; 4·72 million [2·99–6·70] deaths and 148 million [98·6–202] DALYs), and short gestation for birthweight (1·43 million [1·36–1·51] deaths and 139 million [131–147] DALYs). In total, risk-attributable DALYs declined by 4·9% (3·3–6·5) between 2007 and 2017. In the absence of demographic changes (ie, population growth and ageing), changes in risk exposure and risk-deleted DALYs would have led to a 23·5% decline in DALYs during that period. Conversely, in the absence of changes in risk exposure and risk-deleted DALYs, demographic changes would have led to an 18·6% increase in DALYs during that period. The ratios of observed risk exposure levels to exposure levels expected based on SDI (O/E ratios) increased globally for unsafe drinking water and household air pollution between 1990 and 2017. This result suggests that development is occurring more rapidly than are changes in the underlying risk structure in a population. Conversely, nearly universal declines in O/E ratios for smoking and alcohol use indicate that, for a given SDI, exposure to these risks is declining. In 2017, the leading Level 4 risk factor for age-standardised DALY rates was high SBP in four super-regions: central Europe, eastern Europe, and central Asia; north Africa and Middle East; south Asia; and southeast Asia, east Asia, and Oceania. The leading risk factor in the high-income super-region was smoking, in Latin America and Caribbean was high BMI, and in sub-Saharan Africa was unsafe sex. O/E ratios for unsafe sex in sub-Saharan Africa were notably high, and those for alcohol use in north Africa and the Middle East were notably low. Interpretation By quantifying levels and trends in exposures to risk factors and the resulting disease burden, this assessment offers insight into where past policy and programme efforts might have been successful and highlights current priorities for public health action. Decreases in behavioural, environmental, and occupational risks have largely offset the effects of population growth and ageing, in relation to trends in absolute burden. Conversely, the combination of increasing metabolic risks and population ageing will probably continue to drive the increasing trends in non-communicable diseases at the global level, which presents both a public health challenge and opportunity. We see considerable spatiotemporal heterogeneity in levels of risk exposure and risk-attributable burden. Although levels of development underlie some of this heterogeneity, O/E ratios show risks for which countries are overperforming or underperforming relative to their level of development. As such, these ratios provide a benchmarking tool to help to focus local decision making. Our findings reinforce the importance of both risk exposure monitoring and epidemiological research to assess causal connections between risks and health outcomes, and they highlight the usefulness of the GBD study in synthesising data to draw comprehensive and robust conclusions that help to inform good policy and strategic health planning. Funding Bill & Melinda Gates Foundation.
            Bookmark
            • Record: found
            • Abstract: not found
            • Book Chapter: not found

            A Review of Biochar and Its Use and Function in Soil

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Pollutant emissions and energy efficiency under controlled conditions for household biomass cookstoves and implications for metrics useful in setting international test standards.

              Realistic metrics and methods for testing household biomass cookstoves are required to develop standards needed by international policy makers, donors, and investors. Application of consistent test practices allows emissions and energy efficiency performance to be benchmarked and enables meaningful comparisons among traditional and advanced stove types. In this study, 22 cookstoves burning six fuel types (wood, charcoal, pellets, corn cobs, rice hulls, and plant oil) at two fuel moisture levels were examined under laboratory-controlled operating conditions as outlined in the Water Boiling Test (WBT) protocol, Version 4. Pollutant emissions (carbon dioxide, carbon monoxide, methane, total hydrocarbons, and ultrafine particles) were continuously monitored. Fine particle mass was measured gravimetrically for each WBT phase. Additional measurements included cookstove power, energy efficiency, and fuel use. Emission factors are given on the basis of fuel energy, cooking energy, fuel mass, time, and cooking task or activity. The lowest PM(2.5) emissions were 74 mg MJ(delivered)(-1) from a technologically advanced cookstove compared with 700-1400 mg MJ(delivered)(-1) from the base-case open 3-stone cookfire. The highest thermal efficiency was 53% compared with 14-15% for the 3-stone cookfire. Based on these laboratory-controlled test results and observations, recommendations for developing potentially useful metrics for setting international standards are suggested.
                Bookmark

                Author and article information

                Journal
                ACS Omega
                ACS Omega
                ao
                acsodf
                ACS Omega
                American Chemical Society
                2470-1343
                24 February 2022
                08 March 2022
                : 7
                : 9
                : 7481-7498
                Affiliations
                []Grupo de Manejo Eficiente de la Energía—GIMEL, Facultad de Ingeniería, Universidad de Antioquia , Calle 67, No. 53-108, Medellín 050010, Colombia
                []Grupo Energía Alternativa—GEA, Facultad de Ingeniería, Universidad de Antioquia , Calle 67, No. 53-108, Medellín 050010, Colombia
                Author notes
                Author information
                https://orcid.org/0000-0001-7532-8519
                https://orcid.org/0000-0002-5043-6414
                https://orcid.org/0000-0002-3811-4471
                Article
                10.1021/acsomega.1c05137
                8908516
                35284767
                4921cf9c-d087-4142-ad45-3a66d16344f2
                © 2022 The Authors. Published by American Chemical Society

                Permits non-commercial access and re-use, provided that author attribution and integrity are maintained; but does not permit creation of adaptations or other derivative works ( https://creativecommons.org/licenses/by-nc-nd/4.0/).

                History
                : 15 September 2021
                : 22 December 2021
                Funding
                Funded by: Universidad de Antioquia, doi 10.13039/501100005278;
                Award ID: PRG2020-33302
                Categories
                Article
                Custom metadata
                ao1c05137
                ao1c05137

                Comments

                Comment on this article