A system of equations is developed for the theory of bending of thin elastic plates which takes into account the transverse shear deformability of the plate. This system of equations is of such nature that three boundary conditions can and must be prescribed along the edge of the plate. The general solution of the system of equations is obtained in terms of two plane harmonic functions and one function which is the general solution of the equation Δψ − (10/h2)ψ = 0. The general results of the paper are applied (a) to the problem of torsion of a rectangular plate, (b) to the problems of plain bending and pure twisting of an infinite plate with a circular hole. In these two problems important differences are noted between the results of the present theory and the results obtained by means of the classical plate theory. It is indicated that the present theory may be applied to other problems where the deviations from the results of classical plate theory are of interest. Among these other problems is the determination of the reactions along the edges of a simply supported rectangular plate, where the classical theory leads to concentrated reactions at the corners of the plate. These concentrated reactions will not occur in the solution of the foregoing problem by means of the theory given in the present paper.
